Nissan Sylphy 2.0 (G11) Rear Lower Brace

Following the installation of the SUPERCIRCUIT Front Strut Bar on the Nissan Sylphy 2.0 (G11) earlier. Here is yet another Nissan Sylphy installed the SUPERCIRCUIT Rear Lower Brace to further enhance the chassis stiffness for better road holding and maneuvering.

 

The 4-point SUPERCIRCUIT Rear Lower Brace is designed to mount at the area where the control arms of rear Nissan Sylphy 2.0 suspension system is mounted to the chassis, to strengthen this area allows the rear suspension system to take up higher load during cornering and minimize rear chassis flex.

Carefully designed and manufactured to enhance structural integrity of the rear lower chassis of the Nissan Sylphy 2.0 (G11), for a better road holding capability and maneuverability.

Coated in industrial grade MATTE BLACK scratch resistance coating, the SUPERCIRCUIT Rear Lower Brace is not only matching well with the undercarriage of the Nissan Sylphy 2.0 (G11), it strengthen the rear lower chassis effectively for your dynamic driving needs!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above Front Sturt Bar or other chassis strengthening products developed for the Nissan Sylphy (G11). Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

You can also purchase online from our ONLINE SHOP and delivery to your doorsteps.

Please 'LIKE' our SUPERCIRCUIT BARS Facebook Page for more images and updates.

Toyota Vios NCP150 Chassis Strengthening Bars

The Chassis Bars Division of SUPERCIRCUIT has developed a complete set of chassis bars and brace to strengthen the chassis of the 3rd generation Toyota Vios (NCP150) which is equipped with the new 1NZ-FE VVT-i engine (2013-2016), which consists of the Front Strut Bar, Front Lower Brace (4-point), Mid Chassis Brace, Rear Strut Bar and Rear Lower Bar.

<FRONT STRUT BAR>

The SUPERCIRCUIT Front Strut Bar is developed to strengthen the front upper chassis of the Toyota Vios NCP150 for a more precised turning and maneuvering.

<FRONT LOWER BRACE>

The 4-point SUPERCIRCUIT Front Lower Brace is developed to strengthen the area where the front lower crossmember is mounted to the chassis of the Toyota Vios NCP150. It further strengthen the areas where the lower arms of the front suspension system are mounted to the front crossmember from being distorted/ flexed during cornering. Hence a more precised turning and maneuvering, better road feedback is achieved.

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar is developed to strengthen the area where the trailing arms of the rear suspension are mounted to the chassis of the Toyota Vios NCP150 to minimize movement or flex of the rear chassis as well as the rear solid axle. Hence a firmer rear-end and lesser rear-end fishtailing effect when driving out of corners.

All the above are designed and manufactured with great engineering input to ensure effectiveness and structural integrity. They are coated in industrial grade MATTE BLACK finishing which is scratch resistance and durable.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above chassis strengthening products developed for the 3rd generation Toyota Vios (NCP150). Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on our SUPERCIRCUIT BARS Facebook Page for more images and updates.

Toyota Vios (NCP151) Rear Lower Bar

The Chassis Bars Division of SUPERCIRCUIT has developed a set of bar and braces to strengthen the chassis of the 3rd generation Toyota Vios (NCP151) which is equipped with the new 2NR-FE Dual VVT-i engine and upgraded 7-speed CVT, which consists of the Front Strut Bar, Front Lower Brace (4-point) and Rear Lower Bar.

Shown in the pictures here is the SUPERCIRCUIT Rear Lower Bar installed to the 3rd generation Toyota Vios (NCP151, model year 2016 onwards).

The SUPERCIRCUIT Rear Lower Bar strengthen the rear lower chassis of the Toyota Vios to minimize rear lower chassis flex, for a more agile steering and better handling out of corners.

The brackets of the SUPERCIRCUIT Toyota Vios Rear Lower Bar are carefully designed and produced to ensure the structural integrity and accurate fitment. All these are contributed to a better road holding and maneuverability.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above Rear Lower Bar or other chassis strengthening products developed for the 3rd generation Toyota Vios (NCP151) with dual VVT-i 7-speed CVT. Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

You can also purchase online from our ONLINE SHOP and delivery to your doorsteps.

Please 'LIKE' our SUPERCIRCUIT BARS Facebook Page for more images and updates.

Nissan Almera (N17) Rear Strut Bar

To improve the handling and maneuvering of the Nissan Almera (N17), SUPERCIRCUIT Chassis Bar Division has developed the chassis strengthening products to cater for different needs and driving requirement, namely the Front Strut Bar, Rear Strut Bar and Rear Lower Brace.

Here is the SUPERCIRCUIT Rear Strut Bar installed to the Nissan Almera (N17) to reduce the rear upper chassis flex, for a better and controlled driving experience in and out of the corners.

The stylish and sophisticated rear strut bar is finished in MATTE BLACK scratch resistance industrial grade coating. It is designed to strengthen the rear upper chassis of the Nissan Almera for better road holding capability and more stable going through corners. It is not only looking great and blends in well with the car interior, it performed excellently in reducing chassis flex too!

It is mounted to the rear upper chassis of the Nissan Almera with brackets made with laser cut and v-bending techniques, so ensure strength and structural integrity.

Like all the other products produced by SUPERCIRCUIT CHASSIS BARS, this chassis strengthening bar is also designed and handled with care during the whole production process for a safer and pleasant driving.

Please contact us at SUPERCIRCUIT CHASSIS BARS DIVISION for more information about the above Nissan Almera (N17) Sturt Bar, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

You can also purchase online from our ONLINE SHOP and delivery to your doorsteps.

Please 'LIKE' our SUPERCIRCUIT BARS Facebook Page for more images and updates.

Honda HR-V Rear Lower Bar

SUPERCIRCUIT Chassis Bars Division has developed a complete set of chassis strengthening products to optimize the Honda HR-V steering and maneuvering experience.

Here is the latest add on, the Honda HR-V Rear Lower Bar, to complete the range of chassis strengthen products for this front wheel drive mid sized SUV.

The SUPERCIRCUIT Rear Lower Bar is designed to hold the areas where the two sides of the lower rear axle is mounted to the car body as shown in the pictures here.

SUPERCIRCUIT uses laser cut and v-bent technique to form the brackets at both ends to ensure structural integrity and be able to withstand load.

The industrial grade MATTE BLACK coating is stylish and scratch resistance. It looks good and professional at the undercarriage of the Honda HR-V chassis. You get both the aesthetic and functionality at the same time!

Please contact us at SUPERCIRCUIT CHASSIS BARS DIVISION for more information about all the chassis strengthening products developed for the 2nd generation Honda HR-V (2014-present). Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

You can also purchase online from our ONLINE SHOP and delivery to your doorsteps.

Please 'LIKE' our SUPERCIRCUIT BARS Facebook Page for more product information and updates.

Nissan Sylphy 2.0 (G11) Front Strut Bar

SUPERCIRCUIT Front Strut Bar made for the Nissan Sylphy (G11) is tighten to the front upper suspensions where they are sat on the chassis, to strengthen the front upper chassis and minimize front chassis flex. 

The stylish front strut bar finished in industrial grade MATTE BLACK coating combines functionality and aesthetic in one, is specially developed for the Nissan Sylphy 2.0 (G11) as shown below.

The SUPERCIRCUIT Front Strut Bar provides a more agile steering, responsive and better road surface feedback, and the professional matte black coating looks great at the engine bay too!

The brackets of the SUPERCIRCUIT Front Strut Bar are laser cut and v-bend to shape, this technique can ensure a more precised fitment and has stronger structural integrity. All these are contributed to a better road holding and maneuverability.

Coated in industrial grade MATTE BLACK coating, the SUPERCIRCUIT Nissan Sylphy 2.0 (G11) Front Strut Bar is stylish and matched well with the rest of the colour at the engine bay. 

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above Front Sturt Bar or other chassis strengthening products developed for the Nissan Sylphy (G11). Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

You can also purchase online from our ONLINE SHOP and delivery to your doorsteps.

Please 'LIKE' our SUPERCIRCUIT BARS Facebook Page for more images and updates.

Suzuki Swift 1.5 (ZC21S) Front Lower Brace

To further strengthen the chassis of the 2nd generation Suzuki Swift 1.5L (ZC21S) after the Front Strut Bar is installed, SUPERCIRCUIT CHASSIS BARS DIVISION has developed the Front Lower Brace and installed as shown below.

 

Carefully designed and manufactured, this scratch resistance MATTE BLACK coated Front Lower Brace reinforce the areas where the front crossmember are mounted to the car chassis so it is able to hold stronger load, all these are contributed to a better road holding and maneuverability of the 2nd generation Suzuki Swift 1.5L (ZC21S).

The SUPERCIRCUIT Front Lower Brace is to hold the front crossmember of the 2nd generation Suzuki Swift 1.5L (2004-2010, code ZC21S), so the areas where the front Lower Control Arm is mounted to the vehicle chassis are further strengthen. 

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

You can also purchase online from our ONLINE SHOP and delivery to your doorsteps.

Please 'LIKE' and follow the SUPERCIRCUIT BARS Facebook Page for more images and product updates.

Perodua Myvi 1.3 (Gen2) Front Lower Brace

To strengthen the chassis for better handling and maneuvering, SUPERCIRCUIT CHASSIS BARS Division has developed the Front Strut Bar, Front Lower Brace, Rear Compartment Brace and Rear Lower Bar for the 2nd generation Perodua Myvi 1.3.

Featured below is the SUPERCIRCUIT Front Lower Brace specially developed for the 2nd generation Perodua Myvi 1.3.

The 4-point SUPERCIRCUIT Front Lower Brace is designed to strengthen the front lower crossmember mounting area, which is subjected to load from the engine as well as the bounce and rebound of the front suspensions, so the chassis flex can be minimized for a more accurate turning and maneuvering.

The SUPERCIRCUIT 2nd generation Perodua Myvi 1.3L Front Lower Brace is finished in industrial grade MATTE BLACK heavy duty coating. So it is not just looks nice, the results in strengthening and minimize chassis flex are excellent too!

Carefully designed, researched and manufactured to bring you the SUPERCIRCUIT Chassis Bars products for the 2nd generation Perodua Myvi 1.3.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

You can also purchase online from our ONLINE SHOP and delivery to your doorsteps.

Please 'LIKE' our SUPERCIRCUIT BARS Facebook Page for more images and updates.

Proton Inspira 2.0 Front Strut Bar

The SUPERCIRCUIT Front Strut Bar develop for the Protoin Inspira 2.0 does not not only looks stylish at the engine bay, it performed excellently in minimizing front chassis flex and helps in maintaining driving line and improves maneuverability! We combined aesthetic and functionality in one to bring you the SUPERCIRCUIT chassis strengthening bars specially developed for the Proton Inspira monocoque chassis!

The scratch resistance matte black coating is specially selected to make the strut bar blends in well with the other components for a very classy and professional aesthetic at the engine bay.

The mounting brackets of the SUPERCIRCUIT Front Strut Bar are laser cut and v-bend to shape, this technique can ensure a more precised fitment and stronger structural integrity, all these are contributed to a better road holding and maneuverability.

Carefully designed, researched and manufactured to bring you the SUPERCIRCUIT Chassis Bars products. Besides the Front Strut Bar shown below, we also have the SUPERCIRCUIT Front Lower Brace and Rear Lower Bar made for the Proton Inspira 2.0L/ 1.8L.

Please contact us at SUPERCIRCUIT CHASSIS BARS Division, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

You can also purchase online from our ONLINE SHOP and delivery to your doorsteps.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more images and chassis news updates.