Toyota GR86 (ZN8) Rear Anti-roll Bar

Developed specially for the Toyota GR86 (ZN8)/ Subaru BRZ (ZD8), the SUPERCIRCUIT Rear Anti-roll Bar is designed for those who seeks to improve stability and better traction during cornering!

As shown in the photos below, the SUPERCIRCUIT Rear Anti-roll Bar installed to the Toyota GR86 (ZN8), a direct replacement for the factory stock rear anti-roll bar.

Made with 19mm solid torsion spring, the SUPERCIRCUIT rear anti-roll bar made for the Toyota GR86 (ZN8)/ Subaru BRZ (ZD8) simply outperformed the original anti-roll bar and the spring effect of the material provides excellent anti-roll effect and helps to bring the car back to level after exiting corners in shorter time.

Further more, when the vehicle body tends to roll, this anti-roll bar twists, forcing the inside wheel down to keep the chassis flat, which maximizes tire grip and stabilizes the vehicle while cornering or during obstacle avoidance.

Just like all the other SUPERCIRCUIT products, the above Rear Anti Roll Bar made for the Toyota GR86 (ZN8)/ Subaru BRZ (ZD8) is designed and manufactured with great engineering input to ensure effectiveness and optimum performance. It is coated in the same heavy duty industrial grade MATTE BLACK finishing for maximum durability at the undercarriage.

Please contact us at SUPERCIRCUIT CHASSIS BARS DIVISION for more information about the SUPERCIRCUIT chassis strengthening solutions for your car or pay us a visit to our showroom at Ara Damansara for installation.

Please 'LIKE' our SUPERCIRCUIT BARS Facebook Page for more images and updates.

Suzuki Jimny (JB74W) Chassis Strengthening Bars

Here at the SUPERCIRCUIT Chassis Strengthening Division, we have developed a set of chassis strengthening bars and braces to improve the rigidity and strengthen of the chassis for the 4th generation Suzuki Jimny (JB64W/ JB74W), for better handling and maneuvering.

<FRONT STRUT BAR>

The SUPERCIRCUIT Front Strut Bar is designed to installed at the engine bay of the Suzuki Jimny, as shown in the picture below, to improve the rigidity and strengthen this part of the chassis so it can take up heavier load and still be able to maintaining the ladder type frame chassis integrity for a more responsive steering and better maneuvering.

Further more, the SUPERCIRCUIT FRONT STRUT BAR is finished in our signature MATTE BLACK industrial grade heavy duty coating for a very stylish and elegant appearance at the engine bay of the Suzuki Jimny!

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is mounted at the Suzuki Jimny's very front part of the undercarriage, as shown in the picture below, to reinforce the front lower chassis from being flexing too much, especially when the two front wheels are not at the same level i.e. high speed cornering, traveling on uneven surfaces etc.

The industrial grade heavy duty MATTE BLACK coated SUPERCIRCUIT Front Under Bar matched well with the Suzuki Jimny's undercarriage for a very original and professional appearance.

<FRONT LOWER SIDE BARS>

The SUPERCIRCUIT Front Lower Side Bars (in PAIR) are designed to reinforce the areas where the front radius arms are mounted to the Suzuki Jimny's front ladder type chassis, as shown in the picture below.

These front lower side bars improve the strength and rigidity of the front ladder type chassis of the Suzuki Jimny for a more controllable and better maneuvering during both on- and off-road situations.

Like all the other SUPERCIRCUIT products, the above chassis strengthening products are designed and manufactured with great engineering input to ensure effectiveness and structural integrity, to strengthen the chassis for a safer and dynamic driving.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to make an appointment for installation. Tel: +6 03 5632 2855 

Please visit our ONLINE SHOP and get it delivered to your doorsteps.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more images and updates