Honda City GM6 Front Strut Bar + Rear Anti-roll Bar

The 2014-2020 Honda City (GM6) chassis is strengthened with the SUPERCIRCUIT Front Strut Bar & Rear Anti-roll Bar for better handling and maneuvering for a more enjoyable and safe drive!

<FRONT STRUT BAR>

The SUPERCIRCUIT Front Strut Bar is designed to reinforce and strengthen the area where the front upper suspensions are mounted, to minimize front upper chassis flex for accurate steering direction and precise maneuvering.

The SUPERCIRCUIT Front Strut Bar made for the Honda City GM6 is in 2-pcs architecture, with the adjustable threaded stud screw bolt in the middle, for ease of installation.

The brackets at both sides of the SUPERCIRCUIT Front Strut Bar are laser cut and machine bent to shape, for accurate fitment and structural integrity.

The SUPERCIRCUIT Front Strut Bar is finished in our signature MATTE BLACK industrial grade heavy duty coating which is simply stylish and professional at the engine bay!

<REAR ANTI-ROLL BAR>

The 19mm SUPERCIRCUIT Rear Anti-roll Bar made for the Honda City GM6 is designed to mount transversely across the rear torsion beam solid axle as shown in the picture below, to improve the stability and enhance the maneuvability of the vehicle during cornering.

The brackets of the anti-roll bar are mounted at the bottom part of the rear spring seats as shown in the pictures below. They are laser cut from thick steel material and machine bent to shape, for structural integrity and robustness.

During cornering, as the outer suspension moves upwards and the inner suspension move downwards, the SUPERCIRCUIT Rear Anti-roll Bar comes into action in resisting the body rolling effect for a more stabled and controlled cornering!

SUPERCIRCUIT Chassis Strengthening Division has developed a set of chassis strengthening bars for the Honda City GM6 to improve the handling and maneuvering of the vehicle.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the chassis strengthening products for your vehicle. Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on our SUPERCIRCUIT Facebook for more product information and updates.

VW Arteon 4Motion Chassis Strengthening Solutions

The VW ARTEON 4motion is at our installation bays for chassis strengthening products that we have specially developed for this particular chassis i.e. the SUPERCIRCUIT Front Strut Bar, Front Lower Brace, Mid Chassis Brace and Rear Lower Side Bars.

<FRONT STRUT BAR>

The SUPERCIRCUIT FRONT STRUT BAR is designed to install across the engine bay of the VW ARTEON, to strengthen the areas where the top of the front suspensions are mounted to the chassis, to maintain the geometry of the chassis from over flexing and to hold the front wheels' alignment in place.

When the flexing of the front upper chassis in minimized, a more accurate maneuvering and sharper steering response can be realized.

Designed and manufactured with great engineering input, the brackets at both sides are laser cut to shape and finished in our signature MATTE BLACK industrial grade heavy duty coating. It is stylish and elegant at the engine bay of the VW ARTEON!

While the above SUPERCIRCUIT Front Strut Bar is designed to strengthen the front upper chassis, the undercarriage of the VW Arteon 4Motion is reinforced with the SUPERCIRCUIT Front Lower Brace, Mid Chassis Brace, Rear Lower Bar and Rear Lower Side Bars as shown in the picture below.

<FRONT LOWER BRACE>

While the SUPERCIRCUIT Front Strut Bar strengthens the VW Arteon's front upper chassis and hold the upper part of the front suspensions, the SUPERCIRCUIT Front Lower Brace reinforce the front lower chassis, for lesser front chassis flex and hold the front wheels alignment in geometry for a sharper steering and accurate maneuvering.

SUPERCIRCUIT Front Lower Brace made for the VW Arteon in our signature MATTE BLACK industrial grade heavy duty coating is simply original at the undercarriage!

<MID CHASSIS BRACE>

The VW Arteon 4Motion factory stock original mid chassis brace is replace with the SUPERCIRCUIT Mid Chassis Bars to improve the mid chassis rigidity for a more agile and responsive cornering.

When the flex at the middle section of the vehicle chassis is minimized, it improves the handling of the vehicle especially during multiple maneuvering at the same time e.g. while negotiating multiple sharp corners or during 'moose test'.

The SUPERCIRCUIT Mid Chassis Brace, which is finished in our signature MATTE BLACK industrial grade heavy duty coating, replaces the VW Arteon 4Motion factory stock original one for better and stronger mid undercarriage!

The rear chassis of the VW Arteon 4Motion is strengthened for a more controlled and stable cornering. We have installed the SUPERCIRCUIT Rear Lower Side Bars at both sides and Rear Lower Bar at the middle as shown in the picture below.

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar reinforces and strengthens the centre area of the rear sub-frame as shown in the below pictures, to allow the rear chassis to take up more load from the transverse dirction without flexing too much, hence a more stable and controlled rear chassis.

The SUPERCIRCUIT Rear Lower Bar made for VW Arteon is finished in our signature MATTE BLACK industrial grade heavy duty coating for a very original and professional appearance at the undercarraige!

<REAR LOWER SIDE BARS>

The SUPERCIRCUIT Rear Lower Side Bars reinforce the front part of the rear sub-frame as well as the side of the rear chassis as shown in the pictures below, to minimize the rear chassis flex of the VW Arteon 4Motion.

The SUPERCIRCUIT Rear Lower Side Bars come in pair and finished in our signature MATTE BLACK industrial grade heavy duty coating for an original and professional appearance at the undercarriage of the VW Arteon 4Motion!

All the above are designed and manufactured with great engineering input to ensure effectiveness and structural integrity. They are finished in our signature MATTE BLACK industrial grade heavy duty coating for a very professional and elegant appearance!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above chassis strengthening products developed for the VW Arteon. Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on our SUPERCIRCUIT Facebook for more product information and updates.

Perodua Alza Mk2 Front Lower Brace & Rear Anti-roll Bar

Here at the SuperCircuit Chassis Bars Division, we have developed one of the most comprehensive chassis strengthening solutions for the 2023 Perodua Alza (a.k.a. D27A/ Alza Alza Mk2) to date, as shown in the picture below.

Each of the bars and braces are designed with their own purpose and function, to cater for various kind of road conditions and driving situations! So, install according to your requirements or install full set for optimum chassis strength!

<FRONT LOWER BRACE>

The SUPERCIRCUIT Front Lower Brace is developed to strengthen the front lower sub-frame and hold the front wheels alignment in place for a more accurate and responsive steering.

The 4-point SUPERCIRCUIT Front Lower Brace is mounted with the original bolts as shown in the pictures below. Such sturcture not only strengthens traversely and longitudinally, but also diagonally for optimum front lower chassis strength!

SUPERCIRCUIT Front Lower Brace made for the Perodua Alza Mk2 in our signature MATTE BLACK industrial grade heavy duty coating is simply original at the undercarriage!

<REAR ANTI-ROLL BAR>

The SUPERCIRCUIT Rear Anti-roll Bar made for the Perodua Alza Mk2 is designed to minimize rear vehicle body roll, for a more agile and responsive maneuvering especially around the corners!

It is designed to install as an add-on across the rear torsion beam of the Perodua Alza Mk2 as shown in the picture below, to improve the rigidity and torsional strength of the axle.

The brackets of the SUPERCIRCUIT Rear Anti-roll Bar which are mounted at where the bottom part of the rear springs sit, are made from thick steel material and laser cut, then machine v-bent to shape. It is structural strong and robust!

Made with solid 19mm high performance spring steel material, the SUPERCIRCUIT rear anti-roll bar made for the Perodua Alza Mk2 is robust and durable. The spring effect of the material provides excellent anti-roll effect and helps to bring the car back to level after exiting corners in lesser time.

All the above are designed and manufactured with great engineering input to ensure effectiveness and structural integrity. They are finished in our signature MATTE BLACK industrial grade heavy duty coating for a very professional and elegant appearance!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above chassis strengthening products developed for the 2nd generation Perodua Alza. Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on our SUPERCIRCUIT Facebook for more product information and updates.