Nissan Navara NP300 (D23) Chassis Strengthening

Here is yet another 3rd generation Nissan Navara NP300 (D23) installed the SUPERCIRCUIT chassis strengthening products to improve and enhance the performance of the 'ladder type chassis', for better steering and maneuvering.

The below picture shows the installation locations for the SUPERCIRCUIT chassis strengthening bars and braces on the Nissan Navara NP300, namely Front Under Brace, Front Lower Brace, Mid chassis Brace and the Rear Under Bar.

<FRONT UNDER BRACE & FRONT LOWER BRACE>

Both these braces are designed to strengthen the front part of the Nissan Navara NP300 (D23) chassis, especially where the front suspensions are mounted. To minimize the front lower chassis from flexing too much and to maintain front wheels alignment for accurate and responsive steering.

The SUPERCIRCUIT Front Under Brace is installed to the front most section of the Nissan Navara NP300 (D23) chassis as shown in the picture below. The industrial grade MATTE BLACK heavy duty coating is simply original and matched well with the undercarriage of the vehicle for a very professional and elegant appearance! 

The SUPERCIRCUIT Front Lower Brace is designed to strengthen the locations where the front lower wishbone are mounted to the chassis, to hold and allow the front suspension to take up more load without flexing too much for the front chassis, hence a more accurate front wheels alignment and sharper steering response.

<MID CHASSIS BRACE>

This huge chassis brace holds and maintain the middle chassis for less flex, hence a more responsive and controlled cornering or over taking.

<REAR UNDER BAR>

The SUPERCIRCUIT Rear Under Bar is designed to mount at the end of the "ladder frame chassis" of the Navara NP300, minimize rear end swing-out effect during high speed or hard cornering.

Please contact us at SUPERCIRCUIT CHASSIS BARS DIVISION for more information about all the chassis strengthening products developed for the 3rd generation Nissan Navara NP300 (D23) model year 2013 onward. Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more product information and updates.