BMW F30 320i Front Strut Bar

The premium and stylish SUPERCIRCUIT Front Strut Bar made for the facelifted BMW F30 320i (N20 engine), to improve handling and enhance maneuvering of the vehicle.

The SUPERCIRCUIT Front Strut Bar is designed to strengthen and reinforce the front upper chassis of the BMW F30 320i (N20), to minimize front upper chassis flex, for a more accurate and sharper steering response.

SUPERCIRCUIT Front Strut Bar in our signature MATTE BLACK industrial grade heavy duty coating is simply stylish and elegant at the N20 engine bay of the BMW F30 320i, just like an original item!

Engineered and manufactured with details, the brackets of the SUPERCIRCUIT Front Strut Bar are laser cut and machine v-bent to shape for structural integrity and precise fitment on your BMW F30 320i engine bay.

The premium and stylish SUPERCIRCUIT Front Strut Bar made for the BMW F30 320i (N20) in our signature MATTE BLACK industrial grade heavy duty coating!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to purchase, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow the SUPERCIRCUIT Facebook Page for more images and product updates.

Subaru XV2 Chassis Strengthening Solutions

The complete chassis improvement and strengthening solutions for the 2nd generation Subaru XV (a.k.a. XV2 below) from SUPERCIRCUIT consists of the Front Strut Bar, Front Lower Brace, Rear Under Bar and Rear Lower Side Bars to cover all aspect of road conditions and driving situations. Each and every one of them has its own function and purpose respectively.

<FRONT STRUT BAR>

The Front Strut Bar strengthen the front upper chassis of the Subaru XV2, to minimize front upper chassis flex and hold the front suspensions in position for a more accurate steering and turning direction.

The SUPERCIRCUIT Front Strut Bar is designed to mount across the engine bay, spanning from the left to right front upper suspension strut top, so the chassis can take up more load without flexing too much and hence, hold the front wheels alignment in place for a more accurate steering and precise maneuvering.

SUPERCIRCUIT Subaru XV2 Front Strut Bar in our signature MATTE BLACK industrial grade heavy duty coating is simply stylish and elegant at the engine bay!

<FRONT LOWER BRACE>

While the front upper chassis of the Subaru XV2 is strengthened with the SUPERCIRCUIT Front Strut Bar, the SUPERCIRCUIT Front Lower Brace is complementing to the Front Strut Bar above but reinforcing the front lower part of the chassis.

The SUPERCIRCUIT Front Lower Brace holds the front lower sub-frame in position, its 4-point design is structural stronger and increase the torsional rigidity of the Subaru XV2's front lower chassis, so it is able to further hold the front wheels alignment in place for a more accurate steering and precise handling.

SUPERCIRCUIT Front Lower Brace is finished in the heavy duty industrial grade MATTE BLACK coating for a very original and professional look at the undercarriage of the Subaru XV2.

While the above SUPERCIRCUIT Front Strut Bar and Front Lower Brace improves the handling and steering of the Subaru XV2, the rear chassis is equally important! We have developed the SUPERCIRCUIT Rear Lower Bar and Rear Lower Side Bars as shown in the picture below to improve the stability and maneuverability during cornering.

<REAR LOWER SIDE BARS>

The SUPERCIRCUIT Rear Lower Side Bars, as the name suggested, strengthen the where the rear lower wishbone is mounted to the chassis, to allow the area to take up more load without flexing too much, so the rear wheels can be on track for a more stabled cornering.

SUPERCIRCUIT Rear Lower Side Bars made for the Subaru XV2 in our signature MATTE BLACK heavy duty coating is simply original and professional at the undercarriage.

<REAR UNDER BAR>

The SUPERCIRCUIT Rear Under Bar strengthens and reinforces the rear-end section of the sub-frame shown in the picture below, to further minimize the rear-end swaying or fish tailing effect especially exiting high speed corners, overtaking or sudden maneuvering.

The SUPERCIRCUIT Rear Under Bar in our signature MATTE BLACK heavy duty coating is simply original and professional at the undercarriage of the Subaru XV2.

All the above bars and braces are designed and manufactured with great details and finished in heavy duty MATTE BLACK industrial grade coating, so they are not only stylish and looks original at the chassis, we also ensure the structural integrity so they also performed excellently!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to purchase, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow the SUPERCIRCUIT Facebook Page for more images and product updates.

Proton X50 Chassis Strengthening Solutions

SUPERCIRCUIT Chassis Strengthening Bars & Anti-roll Bar developed for the Proton X50, to enhance and improve the steering and maneuvering.

We have developed a very comprehensive chassis strengthening bars & braces for the Proton X50, to further improve the handling and maneuvering of the vehicle.

Installed to the Proton X50 featured here is the undercarriage strengthening products from SUPERCIRCUIT, namely the FRONT STRUT BAR, FRONT UNDER BAR, FRONT LOWER BRACE, REAR LOWER BAR and REAR ANTI-ROLL BAR.

While the upper chassis of the Proton X50 is strengthened by the SUPERCIRCUIT Front Strut Bar above, the undercarriage is reinforced and strengthened with the below bars and braces.

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is designed to install and strengthen the forward part of the front sub-frame of the Proton X50 as shown in the picture below, to minimize the front over-hanging from flexing too much, hence a more accurate steering and maneuvering.

<FRONT LOWER BRACE>

The SUPERCIRCUIT Front Lower Brace is designed to strengthen the front lower sub-frame and hold the front wheels alignment in place for a more accurate and responsive steering.

Often installed with the SUPERCIRCUIT Front Strut Bar to obtain optimum front chassis strength and minimize front chassis flex.

<MID CHASSIS BRACE>

The SUPERCIRCUIT Mid Chassis Brace is developed to strengthen the middle part of the Proton X50's chassis, for a more agile and responsive chassis especially with multiple maneuvering or obstacle avoidance.

This 4-point SUPERCIRCUIT Mid Chassis Brace replaces the two factory stock mid chassis bars for stronger torsional rigidity. All mounting points and bolts are original, no mod or drill is required during the installation.

While the front chassis is strengthened for accurate maneuvering and responsive steering control, the rear chassis is always related to cornering performance, therefore the SUPERCIRCUIT REAR LOWER BAR and REAR ANTI-ROLL BAR is installed.

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar is designed to strengthen the area where the rear axle of the Proton X50 is mounted to the chassis, allowing the rear chassis to withstand more loads during cornering without flexing too much. Hence a firmer rear-end and lesser rear-end fish-tailing effect when driving out of corners or during dodging obstacles.

<REAR ANTI-ROLL BAR>

The SUPERCIRCUIT Rear Anti-roll Bar is made of 19mm 'spring steel material' for excellent in maintaining vehicle chassis leveling during cornering and improve chassis recovery time after a sudden maneuvering or obstacle avoidance.

The SUPERCIRCUIT Rear Anti-roll Bar is designed to install across the rear torsion beam of the Proton X50 as shown in the picture below.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to purchase, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow the SUPERCIRCUIT Facebook Page for more images and product updates.

Mercedes-AMG CLA45 Chassis Strengthening

We have supplied and installed yet another set of SUPERCIRCUIT Chassis Strengthening Bars & Braces to the Mercedes-AMG CLA45 (C117), to improve the maneuvering and handling of the vehicle.

The full set of chassis strengthening bars made for the Mercedes-AMG CLA45 (C117) consists of the FRONT STRUT BAR, FRONT UNDER BAR, FRONT LOWER BAR, MID CHASSIS BARS & REAR LOWER BAR. Each of the SUPERCIRCUIT Chassis Strengthening Bars and Braces has its function and role respectively, to cater for various kind of driving situations and road conditions.

<FRONT STRUT BAR>
The SUPERCIRCUIT Front Strut Bar is designed to strengthen and reinforce the front upper chassis of the Mercedes-AMG CLA45 (C117), to minimize front upper chassis flex, for a more accurate and sharper steering response.

SUPERCIRCUIT Front Strut Bar in our signature MATTE BLACK industrial grade heavy duty coating is simply stylish and elegant at the engine bay of the Mercedes-AMG CLA45 (C117), simply original and professional!

The undercarriage of the Mercedes-AMG CLA45 (C117) with all the SUPERCIRCUIT Chassis Strengthening Bars installed. Each of the chassis bars are developed for their purpose and function, to cater for all kind of driving conditions and situations.

While the front undercarriage is strengthened for sharper and responsive steering controls; strengthening the rear chassis to minimize the rear-end swaying or 'fish-tailing' effect especially exiting high speed corners, overtaking or sudden maneuvering.

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is designed to strengthen the forward section of the Mercedes-AMG A45 (W176) front undercarriage as well as the front sub-frame.

Mounted across the front part of the sub-frame, under the engine of the Mercedes-AMG CLA45 (C117), to strengthen this part of the chassis for lesser chassis flex due to the weight of the engine as well as from the front suspensions.

Finished in our signature MATTE BLACK industrial grade heavy duty coating, the SUPERCIRCUIT Front Under Bar is simply original and professional at the undercarriage of the Mercedes-AMG CLA45 (C117).

<FRONT LOWER BAR>

While the SUPERCIRCUIT Front Under Bar above strengthens the front part of the front sub-frame, the SUPERCIRCUIT Front Lower Bar does the same for the rear part of the front sub-frame of the Mercedes-AMG CLA45 (C117) as shown in the picture.

Togther, the SUPERCIRCUIT Front Under Bar and Front Lower Bar strengthens and reinforces the front sub-frame of the Mercedes-AMG CLA45 (C117) for lesser front chassis flex, as well as holding the front wheels alignment better for a more accurate maneuvering and responsive steering direction.

The SUPERCIRCUIT Front Lower Bar finished in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at teh undercarriage of the Mercedes-AMG CLA45 (C117).

<MID CHASSIS BARS>

SUPERCIRCUIT Mid Chassis Bars are designed to minimize the mid chassis flex, to improve mid chassis stiffness for a more agile and responsive maneuvering.

There are two mid chassis bars developed for the Mercedes-AMG CLA45 (C117), namely the FRONT & REAR.

The SUPERCIRCUIT Mid Chassis Bar (FRONT) showned in the pictures below.

The SUPERCIRCUIT Mid Chassis Bar (FRONT) in our signature MATTE BLACK industrial grade heavy duty coating is original and proffessional at the undercarriage of the Mercedes-AMG CLA45 (C117).

The SUPERCIRCUIT Mid Chassis Bar (REAR) is located further rearward to the middle of the Mercedes-AMG CLA45 (C117)'s undercarriage as shown below.

The SUPERCIRCUIT Mid Chassis Bar (REAR) in our signature MATTE BLACK industrial grade heavy duty coating is original and proffessional at the undercarriage of the Mercedes-AMG CLA45 (C117).

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar is designed to strengthen the rear suspension sub-frame of the Mercedes-AMG CLA45 (C117), allowing the chassis to take up more load from the rear suspensions during cornering.

The SUPERCIRCUIT Rear Lower Bar is installed to the rear sub-frame of the Mercedes-AMG CLA45 (C117) as shown in the picture below, to minimize rear lower chassis flex for a more stabled and controlled cornering.

The SUPERCIRCUIT Mercedes-AMG CLA45 (C117) Rear Lower Bar is finished in our signature MATTE BLACK industrial grade heavy duty coating. It is original and professional!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to purchase, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow the SUPERCIRCUIT Facebook Page for more images and product updates.