Proton X50 Chassis Strengthening Solutions

SUPERCIRCUIT Chassis Strengthening Bars & Anti-roll Bar developed for the Proton X50, to enhance and improve the steering and maneuvering.

We have developed a very comprehensive chassis strengthening bars & braces for the Proton X50, to further improve the handling and maneuvering of the vehicle.

Installed to the Proton X50 featured here is the undercarriage strengthening products from SUPERCIRCUIT, namely the FRONT STRUT BAR, FRONT UNDER BAR, FRONT LOWER BRACE, REAR LOWER BAR and REAR ANTI-ROLL BAR.

While the upper chassis of the Proton X50 is strengthened by the SUPERCIRCUIT Front Strut Bar above, the undercarriage is reinforced and strengthened with the below bars and braces.

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is designed to install and strengthen the forward part of the front sub-frame of the Proton X50 as shown in the picture below, to minimize the front over-hanging from flexing too much, hence a more accurate steering and maneuvering.

<FRONT LOWER BRACE>

The SUPERCIRCUIT Front Lower Brace is designed to strengthen the front lower sub-frame and hold the front wheels alignment in place for a more accurate and responsive steering.

Often installed with the SUPERCIRCUIT Front Strut Bar to obtain optimum front chassis strength and minimize front chassis flex.

<MID CHASSIS BRACE>

The SUPERCIRCUIT Mid Chassis Brace is developed to strengthen the middle part of the Proton X50's chassis, for a more agile and responsive chassis especially with multiple maneuvering or obstacle avoidance.

This 4-point SUPERCIRCUIT Mid Chassis Brace replaces the two factory stock mid chassis bars for stronger torsional rigidity. All mounting points and bolts are original, no mod or drill is required during the installation.

While the front chassis is strengthened for accurate maneuvering and responsive steering control, the rear chassis is always related to cornering performance, therefore the SUPERCIRCUIT REAR LOWER BAR and REAR ANTI-ROLL BAR is installed.

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar is designed to strengthen the area where the rear axle of the Proton X50 is mounted to the chassis, allowing the rear chassis to withstand more loads during cornering without flexing too much. Hence a firmer rear-end and lesser rear-end fish-tailing effect when driving out of corners or during dodging obstacles.

<REAR ANTI-ROLL BAR>

The SUPERCIRCUIT Rear Anti-roll Bar is made of 19mm 'spring steel material' for excellent in maintaining vehicle chassis leveling during cornering and improve chassis recovery time after a sudden maneuvering or obstacle avoidance.

The SUPERCIRCUIT Rear Anti-roll Bar is designed to install across the rear torsion beam of the Proton X50 as shown in the picture below.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to purchase, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow the SUPERCIRCUIT Facebook Page for more images and product updates.

Proton X50 Chassis Strengthening & Handling Enhancement

SUPERCIRCUIT Chassis Bars Division has developed a comprehensive chassis strengthening solutions for the Proton X50 to cater for different road conditions and driving situations. Namely, the LEVEL 1 - Front Under Bar + Front Lower Brace + Rear Anti-roll Bar & LEVEL 2 - Front Strut Bar + Mid Chassis Brace + Rear Lower Bar.

Shown below, the Amor Silver Proton X50 with the LEVEL 1 chassis strengthening.

Proton X50 LEVEL-1 chassis strengthening consists of the SUPERCIRCUIT Front Under Bar + Front Lower Brace at the front and Rear Anti-roll Bar at the rear.

The SUPERCIRCUIT Front Under Brace is designed to mount at the over hang of the Proton X50 chassis, under the engine to be exact, to minimize the flex of the very front part of the chassis, which is subject not only to the weight of the engine, also from the road surface while travelling on uneven surfaces.

The SUPERCIRCUIT Front Lower Brace shown in the pictures below is located at the rear of the front sub-frame, further reinforcing the front lower part of the Proton X50 chassis as well as the front sub-frame which is carrying the load from the front suspensions, to further minimize the front lower chassis flex and hold the front wheels alignment better for accurate steering!

Proton X50 LEVEL-1 chassis strengthening consists of the SUPERCIRCUIT Front Under Bar + Front Lower Brace at the front and Rear Anti-roll Bar at the rear undercarriage.

The SUPERCIRCUIT Rear Anti-roll Bar is designed to minimize vehicle body roll during cornering, further improving the cornering ability of the Proton X50 and yet maintaining comfort of the rear passengers.

The SUPERCIRCUIT Proton X50 Anti-roll Bar is made of genuine 'spring steel' for excellent spring effect and responsive recovery after exiting corners, it brings the vehicle back in level in lesser time. It is finished in our signature MATTE BLACK industrial grade heavy duty coating, it is simply stylish and original at the car's undercarriage.

Like all the chassis strengthening products that are designed and manufactured by SUPERCIRCUIT, all the above bars and braces are fabricated with great engineering inputs and details, then finished in our signature MATTE BLACK industrial grade heavy duty coating, so it is not only stylish and looks original at the engine bay and undercarriage, we also ensure it performs excellently too!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to purchase, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow the SUPERCIRCUIT Facebook Page for more images and product updates.