Perodua Alza Mk2 (W150) Undercarriage Strengthening

Here at the SUPERCIRCUIT Chassis Strengthening Division, we have developed a set of chassis strengthening bars and braces to improve the rigidity of the chassis for the 2nd generation Perodua Alza (W150), for better handling and maneuvering.

Featured below are the SUPERCIRCUIT chassis strengthening bars & braces installed to the undercarriage of the Perodua Alza Mk2. Check out the SUPERCIRCUIT Front Strut Bar made for the Alza Mk2 in our separate article here.

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is mounted at the front section of the Perodua Alza Mk2 front sub-frame, to reinforce the front sub-frame and the front lower chassis from being flexing too much, especially when the two front wheels are not at the same level i.e. high speed cornering, traveling on uneven surfaces etc.

The SUPERCIRCUIT Front Under Bar is installed at the front ends of the overhanging on the Perodua Alza Mk2's undercarriage with the original bolts as shown below.

SUPERCIRCUIT Front Under Bar developed for the Perodua Alza Mk2 in our signature MATTE BLACK industrial grade heavy duty coating is just simply original and professional at the undercarriage.

The lower front to mid chassis of the Perodua Alza Mk2 is strengthened with the SUPERCIRCUIT Front Lower Brace, Mid Chassis Brace & Side Chassis Braces as shown in the picture below. Each and everyone of them have their role and function respectively to bring the car a more controlled and better maneuvering under various road conditions and driving situations.

<FRONT LOWER BRACE>

The SUPERCIRCUIT Front Lower Brace reinforces the where the front sub frame of the Perodua Alza Mk2 is mounted to the vehicle body, to maintain the front suspension in position for a more accurate steering, maneuvering and be able to maintain driving line during high speed cornering, for a safer drive.

The 4-point architecture of the SUPERCIRCUIT Front Lower Brace further strengthen in diagonal direction, then mounted to the front chassis with the long and robust original chassis bolts, it effectively minimize front chassis flex during cornering or high speed maneuvering.

SUPERCIRCUIT Front Lower Brace in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Perodua Alza MK2!

<MID CHASSIS BRACE>

While the above SUPERCIRCUIT Front Lower Brace reinforces and strengthen the front undercarriage, the SUPERCIRCUIT Mid Chassis Brace is designed to strengthen the middle section of the Perodua Alza Mk2, to minimize mid chassis flex for a even more agile maneuvering.

The SUPERCIRCUIT Mid Chassis Brace is designed to strengthen the centre section of the middle chassis of the Perodua Alza Mk2. The mounting points are carefully selected so it works effectively in holding the rigidity of the mid chassis.

The SUPERCIRCUIT Mid Chassis Brace is finished in our signature MATTE BLACK industrial grade heavy duty coating, it simply looks original and professional at the undercarriage of the Perodua Alza Mk2!

<SIDE CHASSIS BRACE>

The SUPERCIRCUIT Side Chassis Braces (comes in pair) are designed to install at the two sides of the middle chassis, to strengthen and improve the chassis longitudinal rigidity.

While the SUPERCIRCUIT Mid Chassis Brace mentioned above strengthens the centre section of the mid chassis, the SUPERCIRCUIT Side Chassis Braces strengthens the sides.

Both the SUPERCIRCUIT Side Chassis Braces and Mid Chassis Brace helps in strengthening the middle chassis in lateral and longitudinal directions for a more agile mid chassis; especially effective during multiple actions maneuvering.

The fastening points of the SUPERCIRCUIT Side Chassis Braces on the Perodua Alza Mk2 chassis are carefully selected to ensures effectiveness and functionality.

The SUPERCIRCUIT Mid Chassis Brace is finished in our signature MATTE BLACK industrial grade heavy duty coating, it simply looks original and professional at the undercarriage of the Perodua Alza Mk2!

<REAR LOWER BAR>

The SUPERCIRCUIT REAR LOWER BAR reinforces the area where the rear trailing arms of the Perodua Alza Mk2 are mounted to the vehicle body as shown in the picture below.

When the Perodua Alza Mk2 rear lower chassis is strengthened with the SUPERCIRCUIT Rear Lower Bar, rear chassis flex will be minimized hence lesser 'fish-tailing' effect especially exiting sharp or high speed corners.

SUPERCIRCUIT Rear Lower Bar made for the Perodua Alza Mk2 is finished in our signature MATTE BLACK industrial grade heavy duty coating for a very original and professional appearance at the undercarriage!

<REAR ANTI-ROLL BAR>

The SUPERCIRCUIT Rear Anti-roll Bar is mounted transversely across the rear torsion beam solid axle of the Perodua Alza Mk2, as shown in the picture below, to improve the rigidity and torsional strength of the rear axle.

During cornering, as the outer suspension moves upwards and the inner suspension move downwards, the anti-roll bar comes into action in resisting the body rolling effect for a more controlled and stabled cornering action!

The brackets of the SUPERCIRCUIT Rear Anti-roll Bar are mounted at the bottom part of the rear spring seats, these brackets are made from thick steel material and laser cut then machine v-bent to shape. It is structural strong and robust!

The SUPERCIRCUIT Perodua Alza Mk2 rear anti-roll bar is made with solid 19mm spring steel material, it is robust and durable. The spring effect of the material provides excellent anti-roll effect and helps to bring the car back to level after exiting corners in lesser time.

The SUPERCIRCUIT Rear Anti-roll Bar finished in our signature MATTE BLACK industrial grade heavy duty coating is simply original, stylish and professional at the Perodua Alza Mk2's undercarriage!

All SUPERCIRCUIT Chassis Bars are engineered and manufactured with top notched technology and craftsmanship, then finished in MATTE BLACK industrial grade coating for long lasting performance and stylish professional appearance.

Please contact us at SUPERCIRCUIT CHASSIS BARS DIVISION for more information about the SUPERCIRCUIT chassis strengthening solutions for your car. Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on the SUPERCIRCUIT Facebook Page for more information and product updates.