Suzuki Jimny (JB74W) Chassis Strengthening Bars

Here at the SUPERCIRCUIT Chassis Strengthening Division, we have developed a set of chassis strengthening bars and braces to improve the rigidity and strengthen of the chassis for the 4th generation Suzuki Jimny (JB64W/ JB74W), for better handling and maneuvering.

<FRONT STRUT BAR>

The SUPERCIRCUIT Front Strut Bar is designed to installed at the engine bay of the Suzuki Jimny, as shown in the picture below, to improve the rigidity and strengthen this part of the chassis so it can take up heavier load and still be able to maintaining the ladder type frame chassis integrity for a more responsive steering and better maneuvering.

Further more, the SUPERCIRCUIT FRONT STRUT BAR is finished in our signature MATTE BLACK industrial grade heavy duty coating for a very stylish and elegant appearance at the engine bay of the Suzuki Jimny!

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is mounted at the Suzuki Jimny's very front part of the undercarriage, as shown in the picture below, to reinforce the front lower chassis from being flexing too much, especially when the two front wheels are not at the same level i.e. high speed cornering, traveling on uneven surfaces etc.

The industrial grade heavy duty MATTE BLACK coated SUPERCIRCUIT Front Under Bar matched well with the Suzuki Jimny's undercarriage for a very original and professional appearance.

<FRONT LOWER SIDE BARS>

The SUPERCIRCUIT Front Lower Side Bars (in PAIR) are designed to reinforce the areas where the front radius arms are mounted to the Suzuki Jimny's front ladder type chassis, as shown in the picture below.

These front lower side bars improve the strength and rigidity of the front ladder type chassis of the Suzuki Jimny for a more controllable and better maneuvering during both on- and off-road situations.

Like all the other SUPERCIRCUIT products, the above chassis strengthening products are designed and manufactured with great engineering input to ensure effectiveness and structural integrity, to strengthen the chassis for a safer and dynamic driving.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to make an appointment for installation. Tel: +6 03 5632 2855 

Please visit our ONLINE SHOP and get it delivered to your doorsteps.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more images and updates

Toyota GR86 Front Engine Compartment Bar

We have supplied and installed the SUPERCIRCUIT Front Engine Compartment Bar to the Toyota GR86 2.4 (ZN8) featured below here at our factory today.

This Front Engine Compartment Bar is designed to span across the top of the engine at the engine bay, it is fully compatible with the existing stock OEM strut tower bars, for a better and stronger front upper chassis.

It is designed to mount to both the top front upper suspension mounts of the Toyota GR86 (ZN8) and to maintain the front upper chassis of the vehicle for lesser transversal chassis flex, hence a more accurate steering and better maneuvering.

Further more, it is finished in our signature MATTE BLACK industrial grade heavy duty coating, the SUPERCIRCUIT Front Engine Compartment Bar is simply stylish and professional at the engine bay of the Toyota GR86!

The other SUPERCIRCUIT bars & braces developed for the Toyota GR86 (ZN8), namely FRONT LOWER BRACE, MID CHASSIS BRACE, REAR STRUT BAR & REAR ANTI-ROLL BAR are also available from us or our authorized dealers worldwide. Like all the other SUPERCIRCUIT products, the above chassis strengthening products are designed and manufactured with great engineering input to ensure effectiveness and structural integrity, to strengthen the chassis for a safer and dynamic driving.

Please contact us at SUPERCIRCUIT CHASSIS BARS for more information. Tel: +6 03 5632 2855 or send us a message on our Facebook.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more images and product updates

Ford Raptor 3.0 V6 Front Engine Brace

Here at the SUPERCIRCUIT chassis strengthening bars division, we have supplied and installed the SUPERCIRCUIT Front Engine Brace to the 2022~ Ford Ranger Raptor 3.0 V6 (code P703/RA) shown below.

The 4-point mount SUPERCIRCUIT Front Engine Brace is designed to strengthen the front upper chassis, ensuring better front upper chassis strength for a more responsive steering and accurate maneuvering!

The 4-mounting points design of the SUPERCIRCUIT Front Engine Brace ensures both diagonal and lateral strength of the 2022~ Ford Ranger Raptor 3.0 V6's front upper chassis.

2 of the 4-point SUPERCIRCUIT Front Engine Brace are designed to reinforce the side walls of the engine compartment (picture above) and the other 2 mounting points are located further forward, to allow better longitudinal and tranverse strength compared to the convetional 2-point front strut bar.

SUPERCIRCUIT Front Engine Bracer made for Ford Ranger Raptor 3.0 V6is finished in our signature MATTE BLACK industrial grade heavy duty coating is simply stylish and original at the engine bay!

All SUPERCIRCUIT Chassis Bars are engineered and manufactured with top notched technology and craftsmanship, then finished in MATTE BLACK industrial grade heavy duty coating for long lasting performance and stylish professional appearance.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above chassis strengthening products. Tel: +6 03 5632 2855 or follow us on our SUPERCIRCUIT Facebook Page for more product info and updates.