Perodua Kelisa/ Daihatsu Mira Gino (L700) Front Strut Bar

The below SUPERCIRCUIT Front Strut Bar is specially developed for the 2001-2007 Perodua Kelisa / Daihatsu Mira Gino (L700).

Please contact us at SUPERCIRCUIT CHASSIS BARS DIVISION for more information about all the chassis strengthening products developed for the Perodua Kelisa/ Daihatsu Mira Gino (L700). Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more product information and updates.

Nissan Navara NP300 (D23) Chassis Strengthening

Here is yet another 3rd generation Nissan Navara NP300 (D23) installed the SUPERCIRCUIT chassis strengthening products to improve and enhance the performance of the 'ladder type chassis', for better steering and maneuvering.

The below picture shows the installation locations for the SUPERCIRCUIT chassis strengthening bars and braces on the Nissan Navara NP300, namely Front Under Brace, Front Lower Brace, Mid chassis Brace and the Rear Under Bar.

<FRONT UNDER BRACE & FRONT LOWER BRACE>

Both these braces are designed to strengthen the front part of the Nissan Navara NP300 (D23) chassis, especially where the front suspensions are mounted. To minimize the front lower chassis from flexing too much and to maintain front wheels alignment for accurate and responsive steering.

The SUPERCIRCUIT Front Under Brace is installed to the front most section of the Nissan Navara NP300 (D23) chassis as shown in the picture below. The industrial grade MATTE BLACK heavy duty coating is simply original and matched well with the undercarriage of the vehicle for a very professional and elegant appearance! 

The SUPERCIRCUIT Front Lower Brace is designed to strengthen the locations where the front lower wishbone are mounted to the chassis, to hold and allow the front suspension to take up more load without flexing too much for the front chassis, hence a more accurate front wheels alignment and sharper steering response.

<MID CHASSIS BRACE>

This huge chassis brace holds and maintain the middle chassis for less flex, hence a more responsive and controlled cornering or over taking.

<REAR UNDER BAR>

The SUPERCIRCUIT Rear Under Bar is designed to mount at the end of the "ladder frame chassis" of the Navara NP300, minimize rear end swing-out effect during high speed or hard cornering.

Please contact us at SUPERCIRCUIT CHASSIS BARS DIVISION for more information about all the chassis strengthening products developed for the 3rd generation Nissan Navara NP300 (D23) model year 2013 onward. Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more product information and updates.

Perodua Alza Handling and Maneuvering Enhancement Chassis Bars

There are many ways to enhance the driving and steering of the Perodua ALZA, one of them is to strengthen the chassis!

SUPERCIRCUIT Chassis Bars has the answer to strengthen and reinforce the Perodua ALZA, to minimize chassis flex and to improve the maneuvering performance around the corners. They are the FRONT STRUT BAR, FRONT LOWER BRACE and REAR LOWER BAR.

<FRONT STRUT BAR>

The SUPERCIRCUIT Front Strut Bar developed for the Perodua ALZA strengthen the front upper chassis to maintain the front upper chassis is shape for a more accurate steering and turning direction.

<FRONT LOWER BRACE>

The 4-point SUPERCIRCUIT Front Lower Brace is developed to strengthen the area where the Perodua ALZA front sub-frame is mounted to the chassis, to minimize it from being distorted/ flexed during cornering. Hence a more precised turning, accurate maneuvering and a better road feedback.

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar is developed to strengthen the area where the trailing arms of the rear suspension are mounted to the chassis of the Perodua ALZA, to minimize movement or flex of the rear chassis as well as the rear solid axle. Hence a firmer rear-end and lesser rear-end fishtailing effect when driving out of corners or during overtaking.

Like all the other SUPERCIRCUIT products, the above chassis strengthening products are designed and manufactured with great engineering input to ensure effectiveness and structural integrity of strengthening the chassis for a safer and dynamic driving. They are coated in industrial grade MATTE BLACK finishing which is scratch resistance and durable.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information. Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more images and updates .

Honda Jazz/ Fit GK5 Front Strut Bar

Thank you for making the right choice to install the stylish and elegant MATTE BLACK  SUPERCIRCUIT Front Strut Bar to your Honda Jazz/ Fit GK5!

The SUPERCIRCUIT Front Strut Bar is designed to strengthen the Honda Jazz/ Fit GK5 front upper chassis and helps in minimizing front upper chassis flex, for a more agile, responsive handling and accurate steering around the corners.

The SUPERCIRCUIT Front Strut Bar not only looks professional and original at the engine bay of the Honda Jazz/ Fit GK5, it is also manufactured with great engineering inputs e.g. the brackets are laser cut and machine bent to shape to ensure a more precised fitment and better structural integrity.

Finished in our signature MATTE BLACK industrial grade heavy duty coating, the SUPERCIRCUIT Front Strut Bar made for the Honda Jazz/ Fit GK5 is simply stylish and elegant!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above 3rd generation Honda Fit/ Jazz (GK) Front Strut Bar, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on our SUPERCIRCUIT BARS Facebook Page for more images and product updates.

Subaru XV2 Undercarriage Strengthening

Here is yet another 2nd generation Subaru XV with the chassis code HQ4 (a.k.a. XV2 or "Crosstrek" for some markets) is at the SUPERCIRCUIT HQ for the chassis strengthening products, to further improve and enhance the handling and maneuvering of this AWD chassis.

The SUPERCIRCUIT undercarriage reinforcement items for the Subaru XV2 consists of the FRONT LOWER BRACE, REAR UNDER BAR and REAR LOWER WISHBONE REINFORCEMENT BARS, to cater for different road conditions and driving situations.

 <FRONT LOWER BRACE>

The SUPERCIRCUIT Front Lower Brace is designed to strengthen the front lower sub-frame of the 2nd gen. Subaru XV2 / Subaru Crosstrek, to minimize front chassis flex.

This Front Lower Brace and Front Strut Bar holds the front chassis in position for a more accurate front wheels alignment, hence sharper steering and a more accurate maneuvering.

The SUPERCIRCUIT Front Lower Brace in our signature MATTE BLACK heavy duty industrial grade coating matched well at the undercarriage of the Subaru XV2 for a very original and professional appearance.

While the front chassis is strengthened for accurate and sharper steering, the rear chassis is crucial for cornering and maneuvering. Therefore, the SUPERCIRCUIT Rear Lower Bar and Rear Wishbone Reinforcement Bars are developed.

<REAR UNDER BAR>

The SUPERCIRCUIT Rear Under Bar made for the 2nd gen. Subaru XV/ Crosstrek reinforces the areas where the rear lower sub-frame is mounted to the vehicle's monocoque chassis. To hold the rear lower chassis in shape and minimizes rear chassis flex due to all kind of road conditions.

SUPERCIRCUIT Rear Under Bar made for the Subaru XV2 in our signature MATTE BLACK heavy duty coating.

<REAR LOWER WISHBONE MOUNT REINFORCEMENT BARS>

The SUPERCIRCUIT Rear Lower Wishbone Reinforcement Bars come in a set of two pieces, they are designed to reinforced the areas where the rear lower wishbones of the 2nd gen. Subaru XV are mounted to the sub-frame (as shown in the picture below) and minimize the sub-frame from flexing, for a more stabled cornering or maneuvering.

SUPERCIRCUIT Rear Lower Wishbone Reinforcement Bars made for the Subaru XV2 in our signature MATTE BLACK heavy duty coating is simply original at the undercarriage.

Like all the other SUPERCIRCUIT products, the bars and are designed and manufactured with great details and engineering input to ensure effectiveness and structural integrity.

For further information or to install, please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for other SUPERCIRCUIT Chassis Bars products on display.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more information and product updates.

Subaru XV/ Crosstrek Chassis Strengthening Bars & Braces

Yet another 1st generation SUBARU XV/ Crosstrek installed the complete SUPERCIRCUIT Bars and Braces to enhance and to strengthen the chassis for a more stabled and controlled maneuvering.

The complete chassis improvement and strengthening solutions from SUPERCIRCUIT consists of the Front Strut Bar, Front Lower Brace, Rear Under Bar and Rear Lower Wishbone Reinforcement Bars. Each and every one of them has its own function and purpose respectively.

<FRONT STRUT BAR>

The Front Strut Bar strengthen the front upper chassis of the 1st generation Subaru XV/ Subaru Crosstrek, to minimize front upper chassis from over flexing and hold the front suspensions in position for a more accurate steering and turning direction.

<FRONT LOWER BRACE>

The SUPERCIRCUIT Front Lower Brace is designed to strengthen the front lower sub-frame of the 1st gen. Subaru XV/ Subaru Crosstrek, to minimize front chassis flex.

This Front Lower Brace and Front Strut Bar holds the front chassis in position for a more accurate front wheels alignment, hence sharper steering and a more accurate maneuvering.

While the front chassis is strengthened for accurate and sharper steering, the rear chassis is crucial for cornering and maneuvering. Therefore, the SUPERCIRCUIT Rear Lower Bar and Rear Wishbone Reinforcement Bars are developed.

<REAR UNDER BAR>

The SUPERCIRCUIT Rear Under Bar made for the 1st gen Subaru XV/ Crosstrek reinforces the areas where the rear lower sub-frame is mounted to the vehicle's monocoque chassis. To hold the rear lower chassis in shape and minimizes rear chassis flex due to all kind of road conditions.

<REAR LOWER WISHBONE MOUNT REINFORCEMENT BARS>

The SUPERCIRCUIT Rear Lower Wishbone Reinforcement Bars come in a set of two pieces, they are designed to reinforced the areas where the rear lower wishbones of the Subaru XV are mounted to the sub-frame (as shown in the picture below) and minimize the sub-frame from flexing, for a more stabled cornering or maneuvering.

Like all the other SUPERCIRCUIT products, the bars and are designed and manufactured with great details and engineering input to ensure effectiveness and structural integrity.

For further information or to install, please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for other SUPERCIRCUIT Chassis Bars products on display.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more information and product updates.