Honda Jazz GK Chassis Strengthening Solutions

SUPERCIRCUIT has developed a complete set of chassis strengthening bars & braces, as well as the anti-roll bar, to strengthen and stiffen the chassis of the Honda Jazz/Fit GK5, to improve and enhance the handling and maneuvering under various kind of road conditions and driving situations.

<FRONT STRUT BAR>

The SUPERCIRCUIT Front Strut Bar is designed to strengthen the areas where the front suspension is mounted to the Honda Jazz GK5 chassis, so the chassis can take up heavier load and still be able to maintaining the monocoque chassis integrity.

Finished in our signature MATTE BLACK heavy duty industrial grade coating, the SUPERCIRUCIT FRONT STRUT BAR simply looks original and stylish at the new Honda Jazz's engine bay!

The SUPERCIRCUIT Honda Jazz/Fit GK5 Front Strut Bar is finished in MATTE BLACK industrial grade heavy duty coating.

In the picture below, the undercarriage of the Honda Jazz/Fit GK5 with all the SUPERCIRCUIT chassis strengthening items installed, namely the Front Under Bar, Front Lower Brace and Rear Lower Bar.

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is designed to install and strengthen the forward part of the front sub-frame of the Honda Jazz GK5 as shown in the picture below.

The SUPERCIRCUIT Front Under Bar strengthen the forward part of the front sub-frame, to minimize the front sub-frame from flexing too much, hence a more accurate steering and maneuvering.

The SUPERCIRCUIT Front Under Bar finished in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Honda Jazz GK5!

<FRONT LOWER BRACE>

The SUPERCIRCUIT FRONT LOWER BRACE is designed to reinforce the front lower sub-frame of the Honda Jazz GK5.

Together, the SUPERCIRCUIT Front Strut Bar and Front Lower Brace holds the front wheels alignment in place for a more precise turning and accurate steering angle.

The SUPERCIRCUIT Front Lower Brace finished in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Honda Jazz GK5!

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar designed to reinforce the area where the rear lower trailing arms are mounted to the Honda Jazz GK5's chassis, to minimize rear chassis flex and to improve the cornering performance of the vehicle.

The SUPERCIRCUIT Rear Lower Bar finished in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Honda Jazz GK5!

All the above are designed and manufactured with great engineering input to ensure effectiveness and structural integrity. They are finished in our signature MATTE BLACK industrial grade heavy duty coating for a very professional and elegant appearance!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above chassis strengthening products developed for the Honda Jazz/ Fit (GK5). Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on our SUPERCIRCUIT BARS Facebook Page for more images and updates.

Proton SAGA (BT3) VVT Undercarriage Strengthening

The SUPERCIRCUIT Chassis Strengthening Bars are installed to improve the handling and enhance the maneuvering of the 3rd generation 2020- Proton SAGA 1.3 VVT (BT3).

For the front undercarriage of the Proton SAGA (BT3), We have supplied and  installed the SUPERCIRCUIT Front Under Bar and Front Lower Brace to improve the strength and stiffness of better, responsive maneuvering and accurate steering.

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is designed to mount at the front overhanging of the chassis, to reinforce the front lower chassis from being flexing too much, especially when the two front wheels are not at the same level i.e. high speed cornering, uneven surfaces etc.

The SUPERCIRCUIT Front Under Bar made for the 3rd gen. Proton SAGA VVT (BT3) in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage.

<FRONT LOWER BRACE>

The 4-point SUPERCIRCUIT Front Lower Brace is developed to strengthen the area where the front sub-frame is mounted to the Proton SAGA VVT's front lower chassis, to minimize front chassis flex.

The SUPERCIRCUIT Front Lower Brace helps to minimize the front lower sub-frame from being distorted/ flexed during maneuvering or travelling on uneven surfaces. Hence a more precise turning, accurate steering and a better road feedback too!

The SUPERCIRCUIT Front Lower Brace made for the 3rd gen. Proton SAGA VVT in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage.

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar is developed to strengthen the area where the rear suspension system is mounted to the vehicle's rear chassis, to minimize rear chassis flex due to the movement of the rear suspension system, hence effectively minimizing twisting/ flexing and the over steering (aka 'fish-tailing') effect during high speed cornering.

The SUPERCIRCUIT Rear Lower Bar made for the 3rd gen. Proton SAGA VVT in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage.

All the above are designed and manufactured with great engineering input to ensure effectiveness and structural integrity. They are finished in our signature MATTE BLACK industrial grade heavy duty coating for a very professional and elegant appearance!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above chassis strengthening products developed for the Proton SAGA VVT (BT3). Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on our SUPERCIRCUIT BARS Facebook Page for more images and updates.

Honda City GN2 Chassis Strengthening Bars & Braces

SUPERCIRCUIT Chassis Bars Division has developed a very comprehensive chassis strengthening products for the Honda City GN2 (GN; 2020~), to improve the handling and maneuvering of the vehicle to cater for various kind of driving situations and road conditions. They are the Front Strut Bar, Front Under Bar, Front Lower Brace, Mid Chassis Bar, Rear Lower Brace and Rear Anti-roll Bar.

 

<FRONT STRUT BAR>

The 4-point design of the SUPERCIRCUIT Front Engine Brace/ Front Strut Bar strengthens the front upper chassis and ensuring better front upper chassis strength for responsive steering and accurate maneuvering!

The SUPERCIRCUIT Front Engine Brace/ Front Strut Bar finished in our signature MATTE BLACK industrial grade heavy duty coating is simply original, stylish and elegant at the engine bay of the Honda City GN2!

As shown in the picture below, the undercarriage of the Honda City GN2 with all the SUPERCIRCUIT Chassis Strengthening Bars & Braces installed.

Each of the SUPERCIRCUIT chassis bars and braces are developed for Honda City GN2 come with its own purpose and function, to cater for all kind of driving conditions and situations.

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is mounted at the front part of the Honda City GN2 front sub-frame, to reinforce the very front part of the chassis from being flexing too much, especially when the two front wheels are not at the same level i.e. high speed cornering, traveling on uneven surfaces etc.

The SUPERCIRCUIT Front Under Bar in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Honda City GN2.

<FRONT LOWER BRACE>

The 4-point SUPERCIRCUIT Front Lower Brace developed for the Honda City GN2 is mounted at the rear side of the front sub-frame. Together with the SUPERCIRCUIT Front Under Bar, the front sub-frame is reinforced and strengthen in every direction for a more rigid and strong front lower chassis.

The SUPERCIRCUIT Front Lower Brace in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Honda City GN2.

<MID CHASSIS BAR>

The SUPERCIRCUIT Mid Chassis Bar is designed to further strengthen the front part of the original mid chassis brace which is installed as standard equipment by the manufacture. It holds the middle section of the Honda City GN2 chassis is place and further improve the agility of the chassis during obstacle avoidance or sudden maneuvering! 

Finished in our signature MATTE BLACK industrial grade heavy duty coating, the SUPERCIRCUIT Mid Chassis Bar is just like an original equipment on the Honda City GN2 undercarriage.

<REAR LOWER BRACE>

While the above SUPERCIRCUIT Mid Chassis Bar strengthen the front part of the mid chassis, the SUPERCIRCUIT Rear Lower Brace is designed to mount at the rear part of the original mid chassis brace, which comes as standard with very Honda City GN2, and further extend to the control arms of rear suspension system, to strengthen this area allows the rear suspension system to take up higher load during cornering without flexing too much of the rear chassis, hence a more stable and controlled cornering.

The SUPERCIRCUIT Rear Lower Brace is finished in our signature MATTE BLACK industrial grade heavy duty coating for a very original and professional appearance at the undercarriage of the Honda City GN2.

All SUPERCIRCUIT Chassis Bars are engineered and manufactured with top notched technology and craftsmanship, then finished in MATTE BLACK industrial grade coating for long lasting performance and stylish professional appearance.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to purchase, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow the SUPERCIRCUIT BARS Facebook Page for more images and updates.

Nissan Serena S-Hybrid (C27) Complete Chassis Strengthening & Handling Enhancement

We have supplied and installed, to date, the most complete chassis strengthening bars and anti-roll bar to the Nissan Serena S-hybrid (C27) here at SUPERCIRCUIT, to improve the maneuvering and handling of the MPV.

<FRONT STRUT BAR>

The SUPERCIRCUIT front strut bar is designed to reinforce at the area where the two front suspension top are mounted to the front chassis of the Nissan Serena S-hybrid (C27), to strengthen the front upper chassis and to minimize front chassis flex.

To install the SUPERCIRCUIT front strut bar to the vehicle, the wipers and the plastic covers at the windscreen has to be removed first.

SUPERCIRCUIT Front Strut Bar in our signature MATTE BLACK industrial grade heavy duty coating is simply stylish and elegant!

The undercarriage of the Nissan Serena S-hybrid (C27) with all the SUPERCIRCUIT Chassis Strengthening Bars & Braces installed.

Each of the chassis bars and braces are developed for their purpose and function, to cater for all kind of driving conditions and situations.

<FRONT LOWER BRACE>

While the SUPERCIRCUIT Front Strut Bar strengthens the front upper chassis and hold the upper part of the front suspensions, the SUPERCIRCUIT Front Lower Brace reinforce the front lower chassis, for lesser front chassis flex and hold the front wheels alignment in geometry for a sharper steering and accurate maneuvering.

The SUPERCIRCUIT Front Lower Brace reinforces the front lower chassis for less flex and holds the front wheels alignment in geometry for a more responsive steering and accurate maneuvering.

SUPERCIRCUIT Front Lower Brace in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Nissan Serena S-hybrid (C27)!

<MID CHASSIS BRACE>

The SUPERCIRCUIT Mid Chassis Brace is designed to strengthen the middle section of the Nissan Serena S-Hybrid (C27), to minimize mid chassis flex for a more agile maneuvering.

SUPERCIRCUIT Mid Chassis Brace in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Nissan Serena S-hybrid (C27)!

While the front chassis is strengthened for sharper and responsive steering, strengthening the rear chassis for a more controlled and stabled cornering, hence the SUPERCIRCUIT Rear Lower Brace is developed.

The lesser the rear chassis flex, the more stable and better control the vehicle can be, during cornering or obstacle avoidance.

The SUPERCIRCUIT Rear Lower Brace is designed to strengthen the mounting points of the Nissan Serena S-Hybrid (C27) rear sub-frame, as shown in the picture below, where they are subjected to loads and forces from the rear suspension arms.

SUPERCIRCUIT Rear Lower Brace in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Nissan Serena S-hybrid (C27)!

<REAR ANTI-ROLL BAR>

The 19mm SUPERCIRCUIT Rear Anti-roll Bar made for the Nissan Serena S-Hybrid C27 is designed to mount transversely across the rear solid axle as shown in the picture below.

During cornering, as the outer suspension moves upwards and the inner suspension move downwards, the anti-roll bar comes into action in resisting the body rolling effect!

The SUPERCIRCUIT Rear Anti-roll Bar finished in our signature MATTE BLACK industrial grade heavy duty coating is made of genuine 'spring steel' for excellent spring effect and responsive recovery after exiting corners, it brings the vehicle back in level in lesser time, hence performs better especially in the 'Moose Test'.

The two brackets which are mounted at where the bottom part of the rear springs sit, are made from thick steel material and laser cut to shape, for structural integrity and robustness.

SUPERCIRCUIT Nissan Serena S-Hybrid (C27) Rear Anti-roll Bar finished in our signature MATTE BLACK industrial grade heavy duty coating is simply stylish and professional at the undercarriage.

All the above are designed and manufactured with great engineering input to ensure effectiveness and structural integrity. They are finished in our signature MATTE BLACK industrial grade heavy duty coating for a very professional and elegant appearance!

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above chassis strengthening products developed for the Nissan Serena S-Hybrid (C27). Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on our SUPERCIRCUIT BARS Facebook Page for more images and updates.