Volkswagen Golf Mk7 1.4TSI Chassis Strengthening Solutions

We have supplied and installed the SUPERCIRCUIT chassis strengthening bars to the VW Golf Mk7 1.4TSI shown below, to strengthen the chassis for improved handling and maneuvering.

<FRONT STRUT BAR>

The SUPERCIRCUIT Front Strut Bar strengthen the front upper chassis of the VW Golf7 1.4TSI, to minimize front upper chassis flex and hold the front suspensions in position for a more accurate steering and turning direction.

To install the SUPERCIRCUIT front strut bar to the vehicle, the wipers and the plastic covers at the windscreen has to be removed as shown in the picture below.

The SUPERCIRCUIT front strut bar is designed to reinforce at the area where the two front suspension top are mounted to the front chassis of the VW Golf7 1.4TSI, to strengthen the front upper chassis and to minimize front chassis flex.

The SUPERCIRCUIT Front Strut Bar developed for the VW Golf7 1.4TSI is finished in our signature MATTE BLACK industrial grade heavy duty coating is simply stylish and original! 

<FRONT LOWER BRACE>
The 4-point SUPERCIRCUIT Front Lower Brace is designed to strengthen the front lower chassis of the VW Golf7 1.4TSI.

Often installed together with the SUPERCIRCUIT Front Strut Bar above, to hold the front and lower chassis in position at the same time; for a more accurate front wheels alignment, hence sharper steering and a more accurate maneuvering.

The SUPERCIRCUIT Front Lower Brace in our signature MATTE BLACK heavy duty industrial grade coating is durable and original at the undercarriage of the VW Golf7 1.4TSI for a very professional appearance!

While the front chassis is strengthened for accurate and sharper steering, the rear chassis is crucial for cornering and maneuvering. Therefore, the below SUPERCIRCUIT Rear Lower Bar (middle) and Rear Lower Side Bars are developed for the VW Golf7 1.4TSI.

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar reinforces and strengthens the centre area of the rear sub-frame as shown in the below pictures, to allow the rear chassis to take up more load from the transverse dirction without flexing too much, hence a more stabled and controlled rear chassis.

The SUPERCIRCUIT Rear Lower Bar is finished in our signature MATTE BLACK industrial grade heavy duty coating for a very original and professional appearance at the undercarriage of the VW Golf7 1.4TSI.

<REAR LOWER SIDE BARS>

The SUPERCIRCUIT Rear Lower Side Bars reinforce the front part of the rear sub-frame as well as the side of the rear chassis as shown in the pictures below, to minimize the rear chassis flex of the VW Golf7 1.4TSI.

All SUPERCIRCUIT Chassis Bars are engineered and manufactured with top notched craftsmanship, then finished in MATTE BLACK industrial grade heavy duty coating for long lasting performance and stylish professional appearance.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to purchase, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow the SUPERCIRCUIT Facebook Page for more images and updates.

Proton X70 CKD Chassis Strengthening

Yet another Proton X70 (CKD version) installed a complete set of the premium SUPERCIRCUIT Chassis Strengthening Bars and Braces for to improve the handling and maneuveirng of the vehicle.

Each and every one of the SUPERCIRCUIT Chassis Strengthening Bars and Braces have their own function and purpose respectively, to enhance and improve the handling of the vehicle under various road conditions and driving situations.

<FRONT STRUT BAR>

The SUPERCIRCUIT Front Strut Bar is designed to install across the engine bay of the Proton X70, to strengthen the area where the two front suspension tops are mounted to the front chassis.

The SUPERCIRCUIT Front Strut Bar strengthens the front upper chassis of the Proton X70, to minimize front chassis flex for a more agile steering response.

Designed and manufactured with great engineer details. The brackets are laser cut and bent with v-bent technique to ensure structural integrity and effectiveness.

The SUPERCIRCUIT Front Strut Bar is installed and fully compatible with the Proton X70 original engine cover as shown in the picture below. No cut or mod to the engine cover during the installation.

SUPERCIRCUIT Front Strut Bar made for Proton X70 is finished in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the engine bay!

While the SUPERCIRCUIT Front Strut Bar strengthens the front upper chassis and hold the upper part of the front suspensions, the SUPERCIRCUIT Front Under Brace and Front Lower Brace shown in the picture below, reinforces the front lower chassis of the Proton X70, for lesser front chassis flex and hold the front wheels alignment in geometry for a sharper steering and accurate maneuvering.

<FRONT UNDER BRACE>

The SUPERCIRCUIT Front Under Brace is designed to mount at the front over hang of the Proton X70 chassis, under the engine as shown in the picture below.

This Front Under Brace is fully compatible with the undercarriage cover and can be installed back in place without having any further modification.

The SUPERCIRCUIT Front Under Brace in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional. It is also compatible with the original undercarriage cover, no cut or mod is required during the installation. The original undercarriage cover can be installed back as original.

<FRONT LOWER BRACE>

The SUPERCIRCUIT Front Lower Brace shown in the pictures below is installed to the rear of the front sub-frame.

The SUPERCIRCUIT Front Lower Brae further reinforces the front lower part of the Proton X70 chassis as well as the front sub-frame, which is subjected to the load from the front suspensions, to further minimize the front lower chassis flex and hold the front wheels alignment better for accurate steering!

SUPERCIRCUIT Proton X70 Front Lower Brace in our signature MATTE BLACK industrial grade heavy duty coating is original and professional at the undercarriage!

For the rear chassis, we have the SUPERCIRCUIT Rear Lower Bar and Rear Under Bar shown in the picture below.

Both the SUPERCIRCUIT Rear Lower Bar and Rear Under Bar are designed to strengthen the rear lower chassis of the Proton X70 (CKD), to minimize the rear-end swaying or fish tailing effect especially exiting high speed corners, overtaking or sudden maneuvering when the rear end tends to swing out due to inertia forces.

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar is amounted at the front section of the rear sub-frame as shown in the picture below.

The front section of the Proton X70 (CKD) rear sub-frame is strengthened with the SUPERCIRCUIT Rear Lower Bar to allow the rear lower chassis to take up more transverse load without causing too much rear chassis flex while negotiating corners. Hence a more stable and controlled cornering.

The SUPERCIRCUIT Rear Lower Bar is finished in our signature MATTE BLACK industrial grade heavy duty coating. It is original and professional!

<REAR UNDER BAR>

The SUPERCIRCUIT Rear Under Bar is designed to strengthen the back section of the rear sub-frame of the Proton X70 (CKD) as shown in the pictures below.

It further strengthen the rear lower chassis and minimize rear lower chassis flex. So both the SUPERCIRCUIT Rear Lower Bar and Rear Under Bar helps in maintaining rear lower chasiss is position for a more stabled and controlled cornering.

SUPERCIRCUIT Rear Under Bar finished in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the undercarriage of the Proton X70 (CKD).

All SUPERCIRCUIT Chassis Bars are engineered and manufactured with top notched craftsmanship, then finished in MATTE BLACK industrial grade heavy duty coating for long lasting performance and stylish professional appearance.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information or to purchase, Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow the SUPERCIRCUIT BARS Facebook Page for more images and updates.

Proton X50 Complete Chassis Strengthening

SUPERCIRCUIT Chassis Strengthening Bars Division has developed a very comprehensive chassis strengthening bars & braces for the Proton X50, to improve the handling and maneuvering of the vehicle.

Each of the SUPERCIRCUIT Chassis Strengthening Bars and Braces has its function and role respectively, to cater for various kind of driving situations and road conditions.

<FRONT STRUT BAR>

The SUPERCIRCUIT front strut bar is designed to reinforce at the area where the two front suspension top are mounted to the front chassis of the Proton X50, to strengthen the front upper chassis and to minimize front chassis flex.

The brackets which are mounted at the top of the front suspension strut are laser cut to shape and manufactured with great details to ensure the SUPERCIRCUIT Front Strut Bar is structural robust to hold the front upper chassis of the Proton X50 in place, hence better handling and maneuvering.

The SUPERCIRCUIT Front Strut Bar is designed to conceal under the Proton X50's front windscreen plastic cover, for a neat and tidy engine bay.

SUPERCIRCUIT Front Strut Bar finished in our signature MATTE BLACK industrial grade heavy duty coating is simply original and professional at the Proton X50's engine bay.

While the upper chassis of the Proton X50 is strengthened by the SUPERCIRCUIT Front Strut Bar above, the undercarriage is reinforced and strengthened with the below bars and braces.

<FRONT UNDER BAR>

The SUPERCIRCUIT Front Under Bar is designed to install and strengthen the forward part of the front sub-frame of the Proton X50 as shown in the pictures below, to minimize the front over-hanging from flexing too much, hence a more accurate steering and maneuvering.

The SUPERCIRCUIT Front Under Bar is designed to mount with the factory stock original bolts on the forward part of the front sub-frame as shown in the picture below, to reinforce transversely across the front lower chassis.

SUPERCIRCUIT Front Under Bar made for the Proton X50 in our signature MATTE BLACK industrial grade heavy duty coating is simply original at the undercarriage!

<FRONT LOWER BRACE>

The SUPERCIRCUIT Front Lower Brace is designed to strengthen the front lower sub-frame and hold the front wheels alignment in place for a more accurate and responsive steering.

Often installed with the SUPERCIRCUIT Front Strut Bar to obtain optimum front chassis strength and minimize front chassis flex.

SUPERCIRCUIT Front Lower Brace made for the Proton X50 in our signature MATTE BLACK industrial grade heavy duty coating is simply original at the undercarriage!

<MID CHASSIS BRACE>

The SUPERCIRCUIT Mid Chassis Brace is developed to strengthen the middle part of the Proton X50's chassis, for a more agile and responsive chassis especially with multiple maneuvering or obstacle avoidance.

This 4-point SUPERCIRCUIT Mid Chassis Brace replaces the two factory stock mid chassis bars for stronger torsional rigidity. All mounting points and bolts are original, no mod or drill is required during the installation. 

Finished in MATTE BLACK industrial grade heavy duty coating, the SUPERCIRCUIT Proton X50 Mid Chassis Brace is not only stylish and matched well at the undercarriage of your car for a more professional and original appearance, it is also manufactured with great details and engineering input to ensure structural integrity and strength!

<REAR LOWER BAR>

The SUPERCIRCUIT Rear Lower Bar is designed to strengthen the area where the rear axle of the Proton X50 is mounted to the chassis, allowing the rear chassis to withstand more loads during cornering without flexing too much. Hence a firmer rear-end and lesser rear-end fish-tailing effect when driving out of corners or during dodging obstacles.

SUPERCIRCUIT Rear Lower Bar made for the Proton X50 in our signature MATTE BLACK industrial grade heavy duty coating is simply original at the undercarriage!

<REAR ANTI-ROLL BAR>

The Rear Anti-roll Bar is designed to minimize vehicle body roll during cornering, to maintain level for a more stable and controlled maneuvering.

The SUPERCIRCUIT Rear Anti-roll Bar is designed to install across the rear torsion beam as shown in the pictures below.

The brackets of the SUPERCIRCUIT Rear Anti-roll Bar which are mounted at where the bottom part of the rear springs sit, are made from thick steel material and laser cut, then machine v-bent to shape. It is structural strong and robust.

SUPERCIRCUIT Rear Anti-roll Bar developed for the Proton X50 is made of 19mm 'spring steel material' for excellent in maintaining vehicle chassis leveling during cornering and improve chassis recovery time after a sudden maneuvering or obstacle avoidance.

All the above are designed and manufactured with great engineering input to ensure effectiveness and structural integrity. They are coated in industrial grade MATTE BLACK finishing which is scratch resistance and durable.

Please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION for more information about the above chassis strengthening products developed for the Proton X50. Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for installation.

Please 'LIKE' and follow us on our SUPERCIRCUIT Facebook Page for more images and updates.