Wednesday, October 2, 2019

Subaru XV/ Crosstrek Chassis Strengthening Bars & Braces

Yet another 1st generation SUBARU XV/ Crosstrek installed the complete SUPERCIRCUIT Bars and Braces to enhance and to strengthen the chassis for a more stabled and controlled maneuvering.


The complete chassis improvement and strengthening solutions from SUPERCIRCUIT consists of the Front Strut Bar, Front Lower Brace, Rear Under Bar and Rear Lower Wishbone Reinforcement Bars. Each and every one of them has its own function and purpose respectively.



<FRONT STRUT BAR>

The Front Strut Bar strengthen the front upper chassis of the 1st generation Subaru XV/ Subaru Crosstrek, to minimize front upper chassis from over flexing and hold the front suspensions in position for a more accurate steering and turning direction.




<FRONT LOWER BRACE>

The SUPERCIRCUIT Front Lower Brace is designed to strengthen the front lower sub-frame of the 1st gen. Subaru XV/ Subaru Crosstrek, to minimize front chassis flex.

This Front Lower Brace and Front Strut Bar holds the front chassis in position for a more accurate front wheels alignment, hence sharper steering and a more accurate maneuvering.




<REAR LOWER WISHBONE MOUNT REINFOCEMENT BARS>
The SUPERCIRCUIT Rear Lower Wishbone Reinforcement Bars come in a set of two pieces, they are designed to strengthen the ends of the rear lower wishbones where they are mounted to the rear sub-frame of the 1st gen. Subaru XV/ Crosstrek.


The Rear Lower Wishbone Bars reinforced the areas where the rear lower wishbones of the Subaru XV are mounted to the sub-frame (as shown in the picture below) and minimize the sub-frame from flexing, for a more stabled cornering or maneuvering.





<REAR UNDER BAR>

The SUPERCIRCUIT Rear Under Bar made for the 1st gen Subaru XV/ Crosstrek reinforces the areas where the rear lower sub-frame is mounted to the vehicle's monocoque chassis. To hold the rear lower chassis in shape and minimizes rear chassis flex due to all kind of road conditions.




Finished in our signature MATTE BLACK industrial grade heavy duty coating, the SUPERCIRCUIT Rear Under Bar made for the 1st gen. Subaru XV/ Crosstrek is stylish and looks original at the undercarriage!


Like all the other SUPERCIRCUIT products, the bars and are designed and manufactured with great details and engineering input to ensure effectiveness and structural integrity.

For further information or to install, please contact us at SUPERCIRCUIT CHASSIS STRENGTHENING BARS DIVISION Tel: +6 03 5632 2855 or pay us a visit to our showroom at SS13 Subang Jaya Industrial Estate for other SUPERCIRCUIT Chassis Bars products on display.

Please 'LIKE' and follow our SUPERCIRCUIT BARS Facebook Page for more information and product updates.

No comments:

Post a Comment